图 纸 说 明 书
Drawings Specification
委托上海新国际博览中心有限公司审核提供的图纸：
If you need the services offered by assigned drawing inspector, please submit the following drawings:
a.展台整体效果图（正，两侧面），一式四份 Booth perspective drawing (1front-side and 2 sides), in quadruplicate
b.底层平面图，一式四份 Ground floor plan, in quadruplicate
c.上层平面图，一式四份 2nd floor plan, in quadruplicate
d.正立面图，一式四份 Elevation, in quadruplicate
e.侧立面图，一式四份 Section (Side elevation), in quadruplicate
f.剖面图，一式四份 Cutaway View, in quadruplicate
g.结构图，一式四份 Structural drawing, in quadruplicate
h.展台规划说明书及搭建材料技术数据，一式四份Detailed booth material checklist, in quadruplicate
对于已通过国家一级注册结构工程师审核的展台，则上海新国际博览中心有限公司将进行复核，复核展台提供的图纸：
For booth approved by Grade A National Registered Structural Engineer, please submit the following drawings:
a.展台整体效果图（正，两侧面），一式四份Booth perspective drawing (1front-side and 2 sides), in quadruplicate
b.底层、上层平面图，一式四份Ground and 2nd floor plan, in quadruplicate
c.正立面图和侧立面图，一式四份Elevation and section (Side elevation), in quadruplicate
d.剖面图，一式四份Cutaway View, in quadruplicate
e.活载，风载，静载计算数据及结构图，一式四份（加盖国家一级注册结构工程师章）
Structural calculation drawing (Stamped by Grade A registered National structural engineer), in quadruplicate
f.结构计算书，一式四份（加盖国家一级注册结构工程师章）
Static test report or static load calculation (Stamped by Grade A registered National structural engineer), in quadruplicate
g.展台审核国家一级注册结构工程师资质证明复印件一份
Certification of Grade A National registered structural engineer
h.展台规划说明书及搭建材料技术数据，一式四份Detailed booth material checklist, in quadruplicate
注意：委托上海新国际博览中心有限公司进行审核或复审的图纸必须将尺寸用阿拉伯数字具体标识，切忌只用网格线标明。
Note：All drawings submitted to the assigned drawing inspector for review shall be dimensioned in Arabic numbers. DO NOT only specify by grid.
下一页
